Roland SPD-S - Manual (Page 103)

103
Effect List
Appendices
13: 2BAND-COMP (2-Band Compressor)
Divides the input sound into two bands, high band and low band, to match the volume or to redress the balance.
In addition, if you press the PAGE buttons, “Knob,” “Velo” and “Pedal” are displayed. You can then select the parameters to be
controlled with the EFFECTS CONTROL knob, the strength (velocity) used in hitting a playing surface, and the expression pedal.
Parameter Value Descriptions
XOver 200–2000 Hz Frequency at which the input sound is divided into two bands
LowThrshd -60–+12 dB Level at which the effect starts to be applied (for low band)
LowRatio 1.0:1, 1.2:1, 1.5:1,
2.0:1, 2.8:1, 4.0:1,
8.0:1, 16.0:1, INF:1 Rate of output compression when the input level exceeds LowThrshd (for low band)
(INF: infinite)
LowAtack 0.25–100 ms Duration from the time when the input level goes above LowThrshd to the start of the ef-
fect (for low band)
LowRelese 50 ms–5.00 s Duration from the time when the input level goes below LowThrshd to the end of the effect
(for low band)
LowGain -6.0–+18.0 dB Amplification/attenuation of the output sound (for low band)
HiThrshd -60–+12 dB Level at which the effect starts to be applied (for high band)
HiRatio 1.0:1, 1.2:1, 1.5:1,
2.0:1, 2.8:1, 4.0:1,
8.0:1, 16.0:1, INF:1 Rate of output compression when the input level exceeds HiThrshd (for high band)
HiAtack 0.25–100 ms Duration from the time when the input level goes above HiThrshd to the start of the effect
(for high band)
HiRelese 50 ms–5.00 s Duration from the time when the input level goes below HiThrshd to the end of the effect
(for high band)
HiGain -6.0–+18.0 dB Amplification/attenuation of the output sound (for high band)
Value Parameters controlled with Knob and Pedal (See the table above for details.)
OFF —
XOVER XOver
LOWTHRESLD LowThrshd
HITHRESLD HiThrshd
Value Parameters controlled with Velo
(See the table above for details.) Descriptions
OFF — —
LOWCOMPRES LowThrshd, LowRatio, LowGain The low band level is more intensively compressed as strike force in-
creases.
HICOMPRES HiThrshd, HiRatio, HiGain The high band level is more intensively compressed as strike force in-
creases.
SPDS_e.book 103 ページ ２００４年４月１９日 月曜日 午前９時５８分