P. 111, Octave, Voicetrans (voice transformer) – Roland SPD-S User Manual
Page 111
111
Effect List
Appendices
25: OCTAVE
Adds a sound that is one and/or two octaves lower.
In addition, if you press the PAGE buttons, “Knob,” “Velo” and “Pedal” are displayed. You can then select the parameters to be
controlled with the EFFECTS CONTROL knob, the strength (velocity) used in hitting a playing surface, and the expression pedal.
26: VOICETRANS (Voice Transformer)
Processes a human voice to change how it sounds.
In addition, if you press the PAGE buttons, “Knob,” “Velo” and “Pedal” are displayed. You can then select the parameters to be
controlled with the EFFECTS CONTROL knob, the strength (velocity) used in hitting a playing surface, and the expression pedal.
Parameter
Value
Descriptions
Cutoff
0–127
Control of frequency above which the input sound is cut off
-1OctLevel
0–127
Volume of the one-octave lower sound
-2OctLevel
0–127
Volume of the two-octave lower sound
DirectLevel
0–127
Volume of the original sound
Value
Parameters controlled with Knob and Pedal
(See the table above for details.)
Descriptions
OFF
—
—
CUTOFF
Cutoff
—
-1OCTLEVEL
-1OctLevel
—
-2OCTLEVEL
-2OctLevel
—
DIRECTLEV
DirectLevel
—
-1 >> -2
-1OctLevel, -2OctLevel
Level balance between the sound that is one octave lower
(-1Oct) and the sound that is two octaves lower (-2Oct) is
controlled within the range from “-1Oct:-2Oct = 127:0” to
“-1Oct:-2Oct = 0:127.”
Value
Parameters controlled with Velo
(See the table above for details.)
Descriptions
OFF
—
—
-1OCTLEVEL
-1OctLevel
—
-2OCTLEVEL
-2OctLevel
—
-1 >> -2
-1OctLevel, -2OctLevel
As the strike force increases, the sound level that is two octaves lower
becomes higher, while the sound level that is one octave lower becomes
lower.
-2 >> -1
-1OctLevel, -2OctLevel
As the strike force increases, the sound level that is one octave lower be-
comes higher, while the sound level that is two octaves lower becomes
lower.
Parameter
Value
Descriptions
Formant
0–127
Control of characteristics of voice (formants)
Balance
D100:0W–D0:100W
Level balance between the original sound (D) and the effected sound (W)
Value
Parameters controlled with Knob, Velo and Pedal (See the table above for details.)
OFF
—
FORMANT
Formant
BALANCE
Balance
SPDS_e.book 111 ページ 2004年4月19日 月曜日 午前9時58分