Renesas Emulation Probe M306V8T-EPB - Manual (Page 21)

M306V8T-EPB User’s Manual 2. Setup
REJ10J0777-0100 Rev.1.00 2005.08.01 Page 21 of 90
2.2 Installing the Emulator Debugger (Renesas Debugger Package for M16C)
If the OS used in your host machine is Windows XP or 2000, this installation must be executed by a user with administrator
rights. Be aware that users without administrator rights cannot complete the installation.
Install the emulator debugger Renesas Debugger Package for M16C following the procedure described below.
2.2.1 Installing the Emulator Debugger
(1) Downloading the Renesas Debugger Package for M16C
Download the Renesas Debugger Package for M16C from the URL below.
http://download.renesas.com/eng/mpumcu/upgrades/in_circuit_emulators/m16c/index.html
(2) Launching
the installer
Start the “setup.exe” program.
(3) Entering the user information
In the “user information” dialog box, enter the user information (contractor, section, contact address, and host machine).
The supplied information will be turned into a format by which technical support will be provided by e-mail.
(4) Selecting
components
In the “component selection” dialog box, select the components you want to install. In this dialog box you can change the
directory in which to install.
(5) Completing the installation
A dialog box will be displayed indicating that setup has been completed. It means that the installation you made is
completed.