Renesas Emulation Probe M306V8T-EPB - Manual (Page 13)

M306V8T-EPB User’s Manual 1. Outline
REJ10J0777-0100 Rev.1.00 2005.08.01 Page 13 of 90
1. Outline
This chapter describes the package components, the system configuration, the specifications of the emulator functions and the
operating environment.
1.1 Package Components
The M306V8T-EPB package consists of the following items. When unpacking it, check to see if your M306V8T-EPB contains
all of these items.
Table 1.1 Package components
Item Quantity
M306V8T-EPB emulation probe 1
M306V8T-PTC (pre-mounted) converter board for 116-pin 0.65-mm-pitch LQFP 1
NQPACK116SB, YQPACK116SB and YQ-GUIDE(x4)
for connecting the M306V8T-PTC and user system 1
OSC-3 (16MHz) oscillator circuit board 1
OSC-2 oscillator circuit bare board 1
Network registers for ports P0--P5 pullup (51kΩ x 8) 6
Hardware tool user registration FAX sheet (English) 1
Hardware tool user registration FAX sheet (Japanese) 1
M306V8T-EPB User’s Manual (this manual) 1
M306V8T-EPB User’s Manual (Japanese) 1
M306V8T-EPB Supplementary Document (English) 1
M306V8T-EPB Supplementary Document (Japanese) 1
* Please keep the M306V8T-EPB's packing box and cushion material in your place for reuse at a later time when sending your
product for repair or other purposes. Always use these packing box and cushion material when transporting this product.
* If there is any question or doubt about the packaged product, contact your local distributor.
* NQPACK116SB, YQPACK116SB and YQ-GUIDE are trademarks of Tokyo Eletech Corporation. For purchasing or
technical information, contact your local distributor.