Renesas Emulation Probe M306V8T-EPB - Manual (Page 15)

M306V8T-EPB User’s Manual 1. Outline
REJ10J0777-0100 Rev.1.00 2005.08.01 Page 15 of 90
1.3 System Configuration
1.3.1 System Configuration
Figure 1.1 shows a configuration of the M306V8T-EPB system.
Figure 1.1 System configuration
(1) Emulation probe M306V8T-EPB
This is an emulation probe for the M16C/60 Series M16C/6V Group M306V8 MCUs and contains an evaluation MCU.
(2) Converter board M306V8T-PTC
This is a converter board for connecting to 116-pin 0.65-mm-pitch LQFP foot pattern on the user system. For details, refer
to "2.9 Connecting the User System" (page 30).
(3) Emulator main unit PC7501
The emulator main unit for the M16C family to be used with this product.
(4) Host machine
A personal computer to control the emulator.
(5) User system
This is your application system.
This emulator cannot supply the power to the user system. Therefore design your system so that the user system is powered
separately.
LPT parallel, USB or LAN
interface
(3) Emulator PC7501
AC adapter
(4) Host machine
(1) Emulation probe
M306V8T-EPB
(2) Converter board
M306V8T-PTC
(5) User system