Nortel Networks Passport Module 8672A - Manual (Page 91)

Chapter 5 Managing the Passport 8672ATM Module with the CLI 91
Using the Passport 8672ATM Module
show ports stats atm felinecurrent
This command displays current statistics on the far end line, which is at the
receiving end. The command uses the syntax:
show ports stats atm felinecurrent [ < ports> ]
Figure 33 shows sample output for the show ports stats atm
felinecurrent command.
IN UNCORR HCS ERR Number of packets received using the interface which were
discarded because of an unknown or unsupported
protocol.
IN PKTS Number of packets received.
OUT PKTS Number of packets transmitted.
IN DROP PKTS Number of in-bound packets dropped.
OUT DROP PKTS Number of out-bound packets dropped.
UNKNOWN VPI/VCI CELLS Number of packets for which the vpi/vci values are
unknown.
IDLE CELLS Cells that are inactive.
Table 25 Information fields for the show ports stats atmport
command (continued)
Field Description