Nortel Networks Passport Module 8672A - Manual (Page 129)

Chapter 6 Configuring the Passport 8672ATM Module 129
Using the Passport 8672ATM Module
Creating two VLANs “byPort”
To create two VLANs “byPort,” see “Creating a VLAN “byPort” and adding
ports” on page 119 . One VLAN must have only one ATM port. The second
VLAN can have one or multiple Ethernet ports.
Assigning IP addresses
To assign an IP address to both VLANs:
1 From the Device Manager menu bar, choose VLAN > VLANs.
The VLAN dialog box opens with the Basic tab displayed ( Figure 52 on
page 120 ).
Table 41 on page 120 describes the fields in the VLAN Basic tab.
2 Click one of the VLANs.
3 Click IP.
The IP, VLAN dialog box opens with the IP Address tab displayed
(Figure 57) .
Figure 57 IP Address tab
Table 44 describes the IP Address tab fields.
Table 44 IP Address tab fields
Field Description
Ip Address IP address of the VLAN
Net Mask Subnet mask associated with the IP address of the entry.
BcastAddrFormat IP broadcast address format used on this interface.
ReasmMaxSize Size of the largest IP datagram which this entity can
re-assemble from incoming IP fragmented datagrams
received on this interface.