Configuring two atm 1483 pvcs on the same atm port, Associating the pvcs with the same vlan, Configuring – Nortel Networks Passport Module 8672A User Manual
Page 127
Chapter 6 Configuring the Passport 8672ATM Module
127
Using the Passport 8672ATM Module
Configuring two ATM 1483 PVCs on the same ATM port
Follow the procedures outlined in
“Bridging point-to-point traffic using an ATM
1483 PVC using Device Manager” on page 118
to configure two ATM PVCs on
the same ATM port.
Associating the PVCs with the same VLAN
Follow the procedures outlined in
“Associating the PVC with the VLAN” on
to associate both PVCs with the same VLAN.
The Passport 8672ATM module directs the two ATM 1483 bridged PVCs to two
different ATM ports on the other end.
Bridging point-to-multipoint traffic using an ATM 1483 PVC
using the CLI
To configure two ATM 1483 bridged PVCs using the CLI:
1
To create two VLANs by port, enter:
config vlan 2 create byport 1
2
To add ATM port (1/1) and some Ethernet ports (3/40-3/48) into the VLAN,
enter:
config vlan 2 port add 1/1, 3/40-3/48
3
To create a 1483 Null-encapsulation UBR PVC, enter
config atm 1/1 pvc create 0.100 ecn 1483-null serv
ubr
Or create a 1483 Null-encapsulation VBR PVC.
config atm 1/1 pvc create 0.100 enc 1483-null serv
vbr
4
To associate the two 1483 bridged PVCs with the same VLAN, enter:
config atm 1/1 pvc 1483 elan create 2 0.100, 0.101
The Passport 8672ATM module directs the two ATM 1483 bridged PVCs to two
different ATM ports on the other end.