Table 13, Insert atm 1483 elan dialog box items – Nortel Networks Passport Module 8672A User Manual
Page 68
68
Chapter 4 Managing the Passport 8672ATM Module with Device Manager
209195-A
describes the items in the Insert ATM 1483 ELAN dialog box.
5
In the VlanId field, type the VLAN ID.
6
In the PvcIds field, type the PVC ID.
7
In the ConnectType field, select the type of routing protocol: bridged, ip, or
ipx.
8
If bridged is selected in the ConnectType field, click Insert.
9
If Ip is selected in the ConnectType field, complete the following fields:
a
In the LocalIpAddress field, type the IP address of the device.
b
In the RemoteIpAddress field, type the IP address of the device that you
are connecting to in the 1483 ELAN.
c
Select the InArpSendEnable option to enable Arp packets.
d
In the InArpSendInterval field, type the time interval between 0 and 60
seconds.
e
Click Insert.
Table 13 Insert ATM 1483 ELAN dialog box items
Item
Description
VlanId
VLAN ID.
PvcIds
Value for Pvc IDs.
ConnectType
Types of connection: bridged, IP or IPX.
LocalIpAddress
IP address of the device.
RemoteIpAddress
IP address of the device to which you are connecting.
InArpSendEnable
Enables ARP sending on the ELAN for connection type IP.
InArpSendInterval
Interval of ARP sending for connection type IP.
IpxVlanEncapMethod
IPX encapsulation protocol: llc, snap, ether-ii, or raw.
IpxNetworkNum
Network number; numeric value, within the range
0...2147483647.
Note: For