Nortel Networks Passport Module 8672A - Manual (Page 106)

106 Chapter 5 Managing the Passport 8672ATM Module with the CLI
209195-A
Web management
Web management allows you to monitor the Passport 8672ATM Module through
a World Wide Web browser from anywhere on your network. The Web interface
provides many of the same monitoring features as the Device Manager software.
For information on:
• Accessing your switch through the Web interface
• Descriptions of the Web page layout
refer to Getting Started with the Passport 8000 Series Management Software.
ATM folder
Use the Web interface to monitor the Passport 8672ATM Module parameters.
When you access the Web interface, the System page is displayed. The ATM
folder is in the navigation pane on the left of the system page
(Figure 44) .
TIME ELAPSED Number of seconds, including partial seconds, that have
elapsed since the beginning of the current measurement
period. If the current interval exceeds the maximum value,
the agent will return the maximum value.
VALID INTERVALS Number of previous 15-minute intervals for which data was
collected.
LINE CODING Line coding for this interface. The B3ZS and CMI are used
for electrical SONET/SDH signals (STS-1 and STS-3). The
Non-Return to Zero (NZR) and the Return to Zero are used
for optical SONET/SDH signals.
LINE TYPE Line type for this interface. The line types are Single Mode
fiber or Multi-Mode fiber interfaces.
CIRCUIT ID Transmission vendor’s circuit identifier, to facilitate
troubleshooting.
Table 36 Information fields for output of the show ports stats atm
sonetmediumtbl command (continued)
Field Description