Nortel Networks Passport Module 8672A - Manual (Page 116)

116 Chapter 6 Configuring the Passport 8672ATM Module
209195-A
• “Changing the clock setting using the CLI” on page 117
Changing the clock setting using Device Manager
This section provides instructions on changing the clock setting.
To change the clock setting using Device Manager:
1 Highlight the port.
2 Choose Edit > Port.
The Port dialog box opens with the Interface tab displayed ( Figure 12 on
page 52 ).
3 Click the ATM tab.
The ATM tab opens. (Figure 50) .
Note: The Passport 8672ATM Module supports only Ethernet ELANs.
Note: If you are connecting one Passport 8672ATM Module directly to
another Passport 8672ATM Module without going through the SONET
cloud, the clock mode at both ends of the circuit may be free-running,
but only one end of this circuit may be configured as loop-timed.