Nortel Networks Passport Module 8672A - Manual (Page 59)

Chapter 4 Managing the Passport 8672ATM Module with Device Manager 59
Using the Passport 8672ATM Module
4 Click Apply.
To enable or disable a port using a shortcut menu:
1 Right-click on the port.
A shortcut menu opens.
2 Choose Enable or Disable.
Editing port parameters
To view or change the general parameters of the port:
1 On the device view, highlight a port.
2 Choose Edit > Port.
The Port dialog box opens with the Interface tab displayed ( Figure 12 on
page 52 ).
Editing ATM and framing parameters
To view or change the ATM and framing parameters of the port:
1 On the device view, highlight a port.
2 Choose Edit > Port.
The Port dialog box opens with the Interface tab displayed ( Figure 12 on
page 52 ).
3 Click the ATM tab.
The ATM tab opens (Figure 16) .