Nortel Networks Passport Module 8672A - Manual (Page 136)

136 Chapter 6 Configuring the Passport 8672ATM Module
209195-A
Figure 61 IPX routing with ATM 1483 PVCs
This configuration requires the following procedures:
• “Creating two VLANs “byPort” ,” next
• “Configuring IPX network numbers” on page 136
• “Enabling IPX forwarding” on page 138
• “Enabling IPX network number forwarding” on page 139
• “Configuring a null-encapsulation PVC” on page 140
• “Associating the PVC with the VLAN” on page 140
Creating two VLANs “byPort”
To create two VLANs “byPort,” see “Creating a VLAN “byPort” and adding
ports” on page 119 . One VLAN must have only one ATM port. The second
VLAN can have one or multiple Ethernet ports.
One VLAN must have only one ATM port.
The second VLAN can have one or multiple Ethernet ports.
Configuring IPX network numbers
To configure the IPX network numbers for both VLANs:
Note: Each configured ATM 1483 PVC uses one VLAN. The Passport
8672ATM Module can be configured for a maximum of 256 VLANs per
MDA and a maximum of 512 VLANs per card.
9939EB
OA OC
ATM VC1
OB
ATM VC1
OB
Passport /
Router
ATM Switches
Passport