Enabling ipx forwarding, Figure 63, Ipx vlan, insert dialog box – Nortel Networks Passport Module 8672A User Manual
Page 138: Table 49, Ipx vlan, insert dialog box fields, Figure 63)
138
Chapter 6 Configuring the Passport 8672ATM Module
209195-A
Figure 63 IPX VLAN, Insert dialog box
describes the IPX VLAN, Insert dialog box fields.
5
In the NetAddr field, configure the IPX network numbers for the VLAN.
6
In the Encap field, click the encapsulation type.
7
Click Insert.
The IPX VLAN, Insert dialog box closes, and the IPX tab is redisplayed.
8
Click Close.
Enabling IPX forwarding
To enable IPX forwarding on both VLANs:
1
From the Device Manager menu bar, choose IPX Routing > IPX.
The IPX dialog box opens with the Globals tab displayed
.
Table 49 IPX VLAN, Insert dialog box fields
Field
Description
NetAddr
The IP address of this VLAN.
Encap
Encapsulation type: ethernetii, snap, llc, or raw.