Nortel Networks Passport Module 8672A - Manual (Page 133)

Chapter 6 Configuring the Passport 8672ATM Module 133
Using the Passport 8672ATM Module
The IP, VLAN, Insert IP Address dialog box opens with the IP Address tab
displayed (
Figure 58 on page 130 ).
Table 44 on page 129 describes the Ip Address tab fields.
4 Click the OSPF tab.
The OSPF tab opens (Figure 60) .
Figure 60 OSPF tab
Table 47 describes the OSPF tab fields.
Table 47 OSPF tab fields
Field Description
Enable Enables or disables OSPF routing on the specified
interface
HelloInterval Length of time, in seconds, between the Hello packets that
the router sends on the interface. This value must be the
same for all routers attached to a common network.
RtrDeadInterval Number of seconds that a router’s Hello packets have not
been seen before its neighbors declare the router down.
DesigRtrPriority Priority of this interface. Used in multi-access networks,
this field is used in the designated router election
algorithm. The value 0 signifies that the router is not
eligible to become the designated router on this particular
network.