Planet Technology IPX-2000 - Manual (Page 87)

7.2.1 Add a Life Line Pa
1. Enter settings shown in Table 7-2.
2. Click Add to see the newly added pa
attern
rn.
ttern
ttern in the Line Pattern.
7.2.2 Edit a Life Line P
1. Edit settings shown in a row.
2. Click Apply at the end of the row to update the information.
7.2.3 Delete a Life Line Pattern
1. Select a Line pattern.
2. Click Delete to remove the pattern from the Line Patte
Table 7-2 Life line Configuration Settings
Field Description
Line Pattern Pattern for e
Note: This i
mergency numbers.
s the pattern after digit stripping. For example,
configure 911 here even if users dial 9911 to reach the
911 service over PSTN when the PSTN trunk has an
outbound dialplan of “9.”.
Des ription Arbitrary description information. c
7.3 Meet-me Conference
onferencing of multiple parties from various devices. A calling party
ce. Moreover, you can enter the
eet-me conference as administrator or normal user level. Administrator has more privilege during the
.
s going concurrently using different room numbers. Before
, the caller has to enter the correct PIN of the room number.
ote: The administrator must drop all parties by pressing *5 when the meeting ends.
elect Feature -> Meet-me Conference to configure meet-me conference feature.
Meet-me conference enables c
could reach this virtual conference room by dialing in a conferen
m
conference. Please refer to Table 7-3
IP PBX allows multiple conference room
entering a meeting room
N
S
76