Planet Technology IPX-2000 - Manual (Page 23)

consecutive “w” result in 2 seconds delay before dialing.
Number of Stripped Digits Select number of leading digits to be stripped from the
original dialed number when matches this route. Using
9NXXXXXX as an example route pattern with number of
stripped digits equal to 1, dialing 95270001 will be stripped
to be 5270001 when it actually got dialed out.
Setp 2: Add Route Group
1. Enter a group ID and then click ADD.
2. The name will show in the table of the webpage.
3. Click the name to view the edit page.
4. Enter settings shown in Table 3-7.
5. Click Back to return to the ADD ROUTE GROUP page.
For deleting a routegroup, select a group ID and click DEL.
Click Next to choose a trunk.
Note: Make sure there is no route associate with the routegroup, or it cannot be deleted.
Table 3-7 Add Routegroup Settings
Field Description
Description Arbitrary description information. Click SET to add/update
the information.
Associated Routes
6
Select routes belonged to this routegroup. Click or
button to add or remove a route to or from the
routegroup. The right box lists current selected routes. Click
SET to update the information. Note the order of the
selected routes is important since it decides which route
would be matched first for an outgoing call.
)
If there is no appropriate routes to select initially, one
can come back later to revise it, once the expected
routes are added.
6
Please refer to 6.4 for details.
12