9 pots setting, Pots setting – Planet Technology IPX-2000 User Manual
Page 81
DID By Privilege
When selected DID By Privilege, select a usergroup in th
list as the privile
e
ge of inbound calls from this trunk. Enter
configuration in DID Prefix and DID Stripping to have the
incoming calls redirected to dial out.
DID Prefix
A digit string to be prefixed to the incoming called number
after stripping.
DID Stripping
A number of leading digits to be stripped from the original
called number. Click All to strip all digits of the original called
r.
numbe
Language
e for system instructions heard from the
Preferred languag
trunk.
IVR List
27
ming calls to this trunk.
Associate an IVR menu with inco
This is mandatory unless the trunk is configured for DID.
Leave it blank and the system will automatically create an
IVR for the trunk.
Usergroup
28
of Privilege
sabled DID, clicks a usergroup in the list whose
the
f inbound calls from this trunk.
rgroups to select
e the
When di
reachability to other usergroups and trunks will use as
privilege o
)
There may not be any appropriate use
initially. One can come back later to revise it, onc
expected usergroups are added.
Caller ID
Leaves it blank to have the default caller ID, or enters a
calle
ed by your ISDN service provider.
r ID that is provid
6.9 POTS Setting
The POTS Setting page allows users to s
requirement from the Central Office (CO)
t impedance from drop-down list and
rs. Click Apply to s
click Restart to activate new settings.
et the parameters of FXO/FXS/ISDN ports based on the
site. Users can selec
fine-tune the paramete
ave modifications. Go to Service -> IP PBX Service, and
27
Please refer to 7.12 for details.
28
Please refer to 6.1 for details.
70