Planet Technology IPX-2000 - Manual (Page 57)

6.3.1.3 Delete a Device
1. Select a Device ID.
2. Click Delete to remove the device from the Device ID.
6.3.1.4 Search a Device
1. Type a group ID in the Search box, or click a device ID in Device ID list.
2. Click Go to see the data.
Table 6-3 ACC (Automatic Client Configuration) Settings
Field Description
Device
A unique ID containing alphabets, numbers, and underscore only
without spaces; 20 characters maximum.
Vendor Prefix Ask your IP Phone vendor for the Prefix. e.g. eip7012.
MAC Address MAC address of the device.
Supplementary Configuration
Supplementary configuration files for IP Phone. The file name
must start with “psc-“.
Codec Preference
Preference order of supported codec and packet times of the
phone.
Enter the information as follows.
Proxy IP/FQDN
Proxy Port
Specify IP address (or fully qualified domain
name) and UDP port of the remote IP PBX.
Registrar IP/FQDN
Registrar Port
Specify IP address (or fully qualified domain
name) and UDP port of the remote IP PBX
Redundant Servers
SIP Domain Specify the SIP domain used by the proxy
and registrar. If not specified, IP address will
be used as the domain by default.
Enable Voice Activity Detection
(VAD)
VAD is a technique that detects absence of audio and conserves
bandwidth by preventing the transmission of "silent packets" over
the network.
)
Select if your IP Phone supports VAD.
DTMF mode Choose a DTMF mode used by the phone.
Daylight Saving
IP PBX supports auto adjustment for daylight saving time. To
enable this function, the administrator must configure the Daylight
Format, Start Time and End Time. The following example
46