Planet Technology IPX-2000 - Manual (Page 63)

-> Analog Phone, and one can add, edit, and delete analog phones. Go to Service -> IP PBX Service,
and click Reload to activate changes. Connect an analog phone to a FXS port and configure the
properties of the port as detailed in Table 6-5.
6.3.3.1 Add an Analog Phone
1. Click the Add New tab to see the detailed Analog Phone Management page.
2. Enter settings shown in Table 6-5.
3. Click Add to see the newly added analog phone in the Extension Number.
6.3.3.2 Edit an Analog Phone
1. Click a port in POTS Port.
2. Edit settings shown in Table 6-5.
3. Click Apply to see the edited information.
6.3.3.3 Delete an Analog Phone
1. Select a POTS Port.
2. Click Delete to remove the extension from the POTS Port.
Table 6-5 FXS Extension Configuration Settings
Field Description
POTS Port FXS port index.
Extension Number A unique line number composed of digits only, e.g. 101; 20
digits maximum.
Pickup Group The pickup group that the extension belongs to. The
extension can set a usergroup that when any extension in
the usergroup rings, the extension can press *8 to pick up
the call in ringing state.
Select Include Reachables check box to be able to pickup
calls that belong to other usergroups which is configured in
Reachable User Groups of the selected usergroup.
Unavailable Timeout Timeout for ringing before a call is answered.
User
21
Select a user that this extension associates with.
)
If there is not any appropriate users to select, one can
come back later once the expected user has been
21
Please refer to 6.1 for details.
52