Planet Technology IPX-2000 - Manual (Page 31)

Language Preferred language for system instructions heard from the
trunk.
IVR List
11
Associate an IVR menu with incoming calls to this trunk.
This is mandatory unless the trunk is configured for DID.
Leave it blank and the system will automatically create an
IVR for the trunk.
Usergroup
12
of Privilege When disabled DID, clicks a usergroup in the list whose
reachability to other usergroups and trunks will use as the
privilege of inbound calls from this trunk.
)
There may not be any appropriate usergroups to select
initially. One can come back later to revise it, once the
expected usergroups are added.
Setp 5: Assign Trunk
In Assign Trunk page, all usergroups display here. The administrator can assign trunks to any
usergroup at this stage.
1. Click a group ID to see the Assign Trunk Management.
2. Enter settings shown in Table 3-11.
3. Click or to add or delete the associate trunks. After adding all trunks, click APPLY.
Note: The order of the assigning trunks matters the hunting sequence in run-time.
Table 3-11 Assign Trunk Settings
Field Description
Routegroup Click to select available routegroups.
Trunk Click to select available trunks.
Group ID The default number is “0”. A trunk with Group ID “0” does not
form a balance group with any other trunks in Group 0. If
Group ID is 1~9, trunks with the same Group ID form a
usage balance group.
11 Please refer to 7.12 for details.
12
Please refer to 6.1 for details.
20