Planet Technology IPX-2000 - Manual (Page 49)

2. Edit the settings.
3. Click Update to change the settings.
5.5.2.3 Delete DHCP Range
1. Click any pool name in the DHCP POOL list.
2. Click Delete to remove the pool name from the DHCP POOL list.
5.5.3 Show Leased Clients
Click the Show Leased Clients tab to see all leased LAN IP addresses and client details.
5.6 IP PBX Service
In Service -> IP PBX Service, you can click the Operations tab to reload, backup, restore, restart or
revert the IP PBX configuration, or click the Settings tab for the IP PBX parameters settings.
5.6.1 Operations
Select Service -> IP PBX Service, and then click the Operations tab.
5.6.1.1 Reload IP PBX Configuration
Click Reload, and IP PBX will reload the configuration once there is no active call. If there is any active
call, it will retain up to 3 minutes, and then IP PBX will reload. This is the most frequently used function
in this page since any IP PBX configuration change has to be reloaded to take effect.
5.6.1.2 Backup IP PBX Configuration
Click Backup, and IP PBX archives and encrypts current configuration into a time-stamped backup file
under tftpboot root directory. To secure configuration files, download them to a local host through the
Get File function in Service -> TFTP Service once a while. Select the PBX Settings Only check box
for only back up Configurations in PBX, which are parts mainly from User Management to Feature in
the tree view; clear the check box to back up both PBX and system (interfaces and services) settings.
Note: Do not change the configuration file name, or the Restore function will reject the configuration
file.
5.6.1.3 Restore IP PBX Configuration
Click a configuration backup file in the list, click Restore, and IP PBX will restore the configuration as
current setup. After restoring, the system will ask for reboot the PBX service, click Yes to reboot IP
PBX.
38