Planet Technology IPX-2000 - Manual (Page 80)

Table 6-12 ISDN Trunk Configuration Settings
Field Description
Trunk Group ID number of this ISDN trunk group. A valid number ranges
t should not overlap with existing Analog from 1 to 31. I
PSTN trunk groups.
Trunk Channels s three channels, two B
and one D channels. The Trunk Channels displays B
Each physical ISDN port occupie
channels only. User only needs to select one or more B
channels here. E.g. 1,2 is for the first physical port, 3,4 is for
the second physical port and so on.
Description Arbitrary description information.
Port Selection search for an available port in the group. Rotating
means to force ports being selected by turns to even cost.
Select to
Switch Type fault. Supports European switch type by de
DID Type DID means direct inward dialing (also called DDI in Europe).
Select a preferred type, None DID, Extension DID, DID by
er
config
incomi
Number and DID by Privilege from the list and then ent
uration in DID Prefix and DID Stripping to have the
ng calls directed to the corresponding trunk.
None DID
t for this trunk.
When selected None DID, all incoming calls will enter IVR
system instead of directly dial to a specified extension.
Select a preferred IVR from IVR lis
Extension DID
list to be an u r incoming calls to
this trunk. If prefix or stripping has been given, the result of
When selected Extension DID, select an extension in the
nconditional destination fo
digit manipulation is dialed in a DTMF string after the call
has been answered by the DID extension as an automatic
2
nd
dialing.
)
If you set a DID extension in a trunk, then only that
extension can use this trunk to call out, and all incoming
calls to this trunk will connect to that extension directly.
DID By Number When selected DID By number, enter configurations in DID
direct line of the extension.
Prefix and DID Stripping to have the incoming calls
directed to the corresponding extension derived by number
manipulation. The ISDN trunk numbers is therefore
regarded as the
69