Error/warnings – Panasonic WJ-HD316 User Manual

Page 56

Press the ALARM RESET button to can-
cel the error or the warning status.
Initialize the DVD-RAM disk. (Refer to
page 52.) When initialized, all recorded
data will be deleted.

Press the ALARM RESET button to can-
cel the error or the warning status.
Replace the disk with new one.

The DVD-RAM disk is almost full or com-
pletely full.

The CD-R or DVD-R disk is almost full or
completely full.

#-nn% (available
disk space is run-
ning out)
#-FULL (no avail-
able disk space)

Error
Warning

The hard disk is almost full or completely
full.

Press the ALARM RESET button to can-
cel the error or the warning status.
Initialize or replace the hard disk. (Refer
to page 124, 129.) When initialized, all
recorded data will be deleted. It is rec-
ommended to copy the data using an
external recording device.

POWER

Warning

The power outage alert signal is sup-
plied from the uninterruptible power sup-
ply system (UPS). Internal processing
will start when the set time for "Shutdown
Time" on the "Basic Setup" menu of
"System" has passed after having
received the power outage alert signal.
(Refer to page 117.) When the internal
processing starts, recording will stop
and all operations will be invalid.

Press the ALARM RESET button to can-
cel the warning status. The unit will start
operation automatically after the UPS
starts power supply.

Press the ALARM RESET button to can-
cel the warning status. If thermal errors
occur frequently, the unit may be mal-
functioning. Contact the dealer.

THERMAL

Warning

Thermal error of the unit or the extension
unit has been detected.

H-METER

Press the ALARM RESET button to can-
cel the warning status. Contact the deal-
er to replace the hard disk.

Warning

The set time for the HOUR METER has
passed. (Refer to page 91.)
It may be reaching the end of the hard
disk’s lifetime.

R-ERROR

W-ERROR

SMART

ALT-*

Indication

ERROR/WARNINGS

• The "error" status

When a fatal error (one that might cause the system to go down) has occurred, the ERROR indicator will blink red.

• The "warning" status

When an error (even though it has not caused the system trouble yet, but which may become a fatal error) has occurred,
the ERROR indicator will blink orange.

Status

Description

Solution

Error

Warning

Recorded image has been altered.
Playback will be paused.

Failed to read data from the HDD.
The HDD may be malfunctioning.

Failed to write data on the HDD.

The hard disk may be malfunctioning
and may not work correctly.

Press the ALARM RESET button to can-
cel the error status. Press the
PLAY/PAUSE button to resume play-
back.

Press the ALARM RESET button to can-
cel the error status. Contact the dealer
to replace the hard disk.

Press the ALARM RESET button to can-
cel the warning status. Contact the deal-
er to replace the hard disk.