Panasonic WJ-HD316 - Manual (Page 24)

24
Marking It is possible to play from a marked point. Do the following to mark a
desired point.
1. Press the SHIFT button. The SHIFT indicator will light.
2. Press the camera selection button 12 (9 for the WJ-HD309) (MARK)
at a desired point to be marked during playback.
Up to 100 points can be marked. When more than 100 points are
marked, the old marked point will be overwritten by new marked
point. In this case, the oldest marked point is the first to be overwrit-
ten.
When marked while displaying in multi-screen, the same number of
split screens will be counted as marked points. (When a point is
marked while displaying a 16-split screen, 16 points will be marked
simultaneously.)
Text display It is possible to display text information attached to recorded image
while playback.
Text display is available only when playing on a single screen.
q Pause playback.
w Press the SHIFT button. The SHIFT indicator will light.
e Press the camera selection button 11 (5 for the WJ-HD309) (TEXT).
A - B repeat playback It is possible to play recorded images between two designated points
repeatedly.
q Designate a start point (A) by pressing the A - B REPEAT button
during playback.
The A - B REPEAT indicator will start blinking, and the time of point
A will be displayed.
To cancel the designated point, press the SETUP/ESC button.
w Designate an end point (B) by pressing the A - B REPEAT button
during playback.
Playback between point A and B will start and keep playing
repeatedly.
The time of point A and B will be displayed during playback.
e Press the A - B REPEAT button during A - B repeat playback to
return to normal playback.
Time of point A
Time of point A and B
ZOOM/
FOCUS
A-B
REPEAT
Blink: When designating a start point (A)
Light: During the A-B repeat playback
(For the WJ-HD316) Mark
12
SHIFT +
Mark
9
SHIFT + (For the WJ-HD309)
(For the WJ-HD316)
(For the WJ-HD309)
TEXT
11
SHIFT +
TEXT
5
SHIFT +