Panasonic WJ-HD316 - Manual (Page 155)

155
• Check if the HDD has an available disk space.
• Check if the recording operation is set to ON.
• Check the schedule settings.
• Check the recording priority settings.
• When the setting menu is displayed by non-interlace sig-
nal, the setting menu may be unable to function normally.
Since the setting menu of the matrix switcher is displayed
by non-interlace signal, recording or displaying with this
unit may be impossible.
• Check if images have been recorded in the HDD.
• Check the connection of camera you are going to control.
Coaxial communication control is available for cameras
connected to VIDEO IN 1 to 8 for WJ-HD316 (1 to 6 for
the WJ-HD309).
• Check if the camera you are going to control is a combina-
tion camera.
• Check the camera control settings.
• Check the level settings of users logging in. Can the users
control cameras?
• Check the BUSY indicator. When the indicator is lighting,
a higher-priority user is controlling cameras. You cannot
control cameras until the indicator goes out.
• Check the level settings of users logging in. Can the users
record images?
• Check the level settings of users logging in. Can the users
display camera images on monitors?
Check item/Remedy Problem Page
Cannot start recording.
Cannot record the SETUP
MENU of a matrix switcher
Cannot playback images.
Cannot control cameras.
Refer to p. 91.
Refer to p. 95.
Refer to p. 102.
Refer to p. 95.
–
Refer to p. 28.
Refer to p. 67.
Refer to p. 67.
Refer to p. 112.
Refer to p. 119
and 121.
Refer to p. 9.
Refer to p. 119
and 121.
Refer to p. 119
and 121.