Viewing controller settings – Promise Technology FAST TRAK100TM User Manual
Page 36

FastTrak100 User Manual
32
Viewing Controller Settings
The Controller Configuration <6> menu selection allows you to enable or disable
the FastTrak100 BIOS from halting (the default) if it detects an error on boot up.
You may also view the system resources (Interrupt and I/O port address) of
FastTrak’s data channels.
FastBuild (tm) Utility 1.xx (c) 1995-2000 Promise Technology, Inc.
[ Adapter Configuration - Options ]
Halt On Error:
Enable
[ System Resources Configuration ]
Channel 1 (IDE1)
Interrupt : A
I/O Port : FFF0
Channel 2 (IDE2)
Interrupt : A
I/O Port : FFA8
[ Keys Available ]
[
←
,
→
, Space] Change Option [ESC] Exit
Halting FastTrak BIOS On Bootup Errors
The [Adapter Configuration – Options] section allows you to enable or disable
FastTrak100 to Halt operation at the BIOS startup screen should an error be
detected. This is the only option that can be changed on this screen.
Viewing FastTrak System Resources
The [System Resources Configuration] section of this submenu displays the PCI
slot interrupt and port address used by the FastTrak100. The resources used are
determined by the Mainboard PCI PnP BIOS for the PCI slot in which the
FastTrak100 resides.
In the rare case that there is a resource conflict, refer to the Mainboard BIOS
documentation on changes on resources allocated to the FastTrak100 PCI slot.