Promise Technology FAST TRAK100TM - Manual (Page 35)

FastTrak100 User Manual
31
FastBuild (tm) Utility 1.xx (c) 1995-2000 Promise Technology, Inc.
[ Rebuild Array Menu ]
Array No
RAID Mode Total Drv Status
Array 2 Mirror 2 Critical
Stripe Block: Not Available
[ Select Drive for Rebuild ]
Channel:ID
Drive Model Capacity (MB)
1 : Slave QUANTUM CR8.4A 8063
[ Keys Available ]
[
↑
] Up [
↓
] Down [ESC] Exit [Enter] Select
11. Under [Select Drive for Rebuild], highlight the replacement drive.
12. Press [Enter] and confirm that the data will be copied on to the selected drive.
All data on the replacement drive will be written over with mirrored information
from the array drive. A progress bar will appear as below.
Please Wait While Duplicating The Image
10%
Complete
13. Once the rebuild process is complete, the user will be asked to reboot the
system.