Palm Zire 72 - Manual (Page 99)

Zire™ 72 Handheld 77
CHAPTER 5 Synchronizing Your Handheld with Your Computer
Synchronizing with a cable
0
1
Prepare your handheld:
a. Connect the HotSync cable to
the USB port on your
computer, and then insert the
other end into the mini-USB
connector on your handheld.
b. Make sure your handheld is
on.
2
Synchronize your handheld with
your computer:
a. Tap Star .
b. When synchronization is
complete, a message appears
at the top of your handheld
screen, and you can
disconnect your handheld
from the cable. Be patient;
synchronization may take up
to a few minutes.
Done
Tip
If you need help with
synchronizing, see I can’t
synchronize my handheld
with my computer.
Tip
View the HotSync log to
see what applications
were successfully
synchronized and
whether any problems
took place during
synchronization. Go to
the Home screen on your
handheld and select
HotSync, and then select
Log; or, click the HotSync
Manager icon on your
computer and then click
View Log. If any problems
occurred during
synchronization, a
message appears on your
computer screen asking if
you want to view the log.