Palm Zire 72 - Manual (Page 635)

Zire™ 72 Handheld 613
CHAPTER 28 Maintaining Your Handheld
Doing a hard reset
Only do a hard reset if a soft reset doesn’t solve your problem, or if you want to clear all of your
information from your handheld.
A hard reset deletes all records and entries stored on your handheld, including
the username that identifies the handheld. Before you do a hard reset, be sure to synchronize.
0
1
Press and hold the power button.
2
While holding the power button, use the tip of the stylus (or a similar object
without a sharp tip) to gently press and release the reset button inside the hole
on the back of your handheld.
3
Wait for the Palm Powered™ logo to appear, then release the power button.
4
When you see the message that warns you about erasing all of the info on your
handheld, do one of the following:
• Press Up on the navigator to finish the reset and show the Digitizer screen.
• Press any other button to do a soft reset.
Done
IMPORTANT [ ! ]