Palm Zire 72 - Manual (Page 110)

Zire™ 72 Handheld 88
CHAPTER 5 Synchronizing Your Handheld with Your Computer
2
On the computer with which you want to synchronize (your own computer)
only, do the following:
a. Select Setup from the HotSync Manager menu.
b. Click the Network tab and make sure your username has a checkmark next to
it. If the checkmark is not there, click the check box next to your username.
c. Click OK.
d. Tap Star on your handheld to record your computer’s network
information on your handheld. You must use the cable or the IR port for this
synchronization.
Continued
Tip
Click TCP/IP Settings to
display the primary
settings for your
computer. Check that
these settings are correct
on your handheld by
selecting the HotSync
icon on the Home screen,
and then selecting
Primary PC Setup from
the Options menu. If the
settings do not match,
restart your computer
and synchronize using
the cable or IR port before
synchronizing by
connecting to a computer
on the network.