Powerware Model V-2000B - Manual (Page 87)

System Configuration = 85
Maximum Bit Rates
The range of available bit rates depends upon the MPEG-2 profile selected. In Main Profile @
Main Level, the record bit rate ranges from 2 Mb/s to 15 Mb/s. When the 4:2:2 Profile is
selected, the range extends from 2Mb/s to 50 Mb/s.
Output Configuration
Select a channel from the dropdown menu. For Channel 1, select the Output tab.
To accept changes made to the configuration dialog box, click Apply. Click OK to accept
changes and close the configuration dialog window. Click Cancel to close the window and
discard any changes. Changes to the Time Code Burn-in position are effective immediately.
Changes to the Audio Slip will be effective when the clip is reloaded.
Figure 28: Channel Output Configuration Window
Time Code Burn-In
This area of the dialog window sets the Time Code Burn-In ON or OFF. When it is set ON,
choose the display position on the video monitor from the drop-down list.
SC/H Phase
Adjusts the Sub-Carrier/Horizontal phase relationship. Use a vector scope to view the phase
relationship and adjust the setting. Changes to the setting are effective immediately without
clicking Apply or OK. The adjustment range is
± 90 ° .