Powerware Model V-2000B - Manual (Page 103)

Network File Transfers = 101
Use DHCP Checkbox
Enabling DHCP will configure the network interface automatically.
If the DHCP box is not selected, the user may then manually enter assignments in the
following windows:
• Host Name
• IP Address
• Net Mask
• Default Router
Host Name may be a fully qualified domain name, such as edit1.mydomain.com. All other
manually configured addresses must be properly formatted IP addresses.
Manual DNS Checkbox
When using DHCP, the DNS name resolution is usually configured automatically. Enabling
Manual DNS configuration requires that a DNS server address be supplied for name
resolution.
Saving Network Configuration
Click on OK, APPLY, or CANCEL to accept or abandon new entries. Changes will not take
effect until the Image Server is powered off and on.