Powerware Model V-2000B - Manual (Page 73)

Automation Control = 71
Report Play (vs Still) At End
When the end of the clip is reached, Image Server will report Play to the automation controller,
instead of Still.
Ignore Preroll Commands
The default value for Image Server’s Preroll time is 10 frames. Automation controllers generally
have the ability to set this value in their own configuration menus, negating a need to adjust this
value dynamically. This box should typically be checked.
Auto E-E
Toggles Auto E-E mode.
Communication Port Parameters
The serial data transfer parameters for the Image Server are fixed, and cannot be changed. These
characteristics are common to all automation controllers:
Baud Rate 38.4 K Baud
Start Bits 1
Data Bits 8
Parity Odd
Stop Bits 1
Tested Automation Controllers
The Image Server has been tested by 360 Systems and manufacturers of equipment listed below,
and found to operate correctly . This list is not comprehensive, and the inclusion or absence of a
product does not indicate a preference for any make or model. Operational variations do exist
between makes and models.
Manufacturer Controller Protocol Notes
H ARRIS A UTOMATION ADC-100 VDCP ALL HARRIS CONTROLLERS SAME
S UNDANCE D IGITAL F AST B REAK VDCP
NV ERZION EMC- NT VDCP
C RISPIN C ORP . S YSTEM 2000 VDCP
F LORICAL A IR B OSS VDCP
DTG A IRO VDCP
L EIGHTRONIX TDC/IP VDCP
T IGHTROPE M EDIA C ABLECAST P2
H ARDATA HDX VIDEO O DETICS A RGENTINA / S OUTH A MERICA
T HOMSON -P ARKERVISION PVTV-P LUS N EWS VDCP A LL CR SERIES