Powerware Model V-2000B - Manual (Page 77)

System Configuration = 75
Date/Time
Open this dialog window to set the Image Server internal system date and time. This
information will be used to time stamp the data files of new recordings. All channels must be
idle to change the Date/Time setting .
Channels
Select a video channel from this dropdown menu to configure channel-specific audio, video,
and time code parameters. For more information about changing channel setups, see Channel
Configuration on page 82.
Many options are presented on a single screen. Some choices logically exclude others. When
making certain selections, other selections may become available, unavailable, or have
different range limits. Options that become unavailable will be grayed out.
To accept changes made to the configuration dialog box, click Apply. Click OK to accept
changes and close the configuration dialog window. Click Cancel to close the window and
discard any changes. Changes will become effective when the channel starts the next (new)
recording.
System Config Options
The Configure System dialog box contains several tabs that organize general machine settings:
Timing Tab
Select the Timing tab to configure the following parameters:
System Parameter Value
Video Sync Genlock, Internal
Genlock Timing Lines: -4 to +12
Pels: -200 to +200
Output Mode 2- or 3-Channel