Powerware Model V-2000B - Manual (Page 81)

System Configuration = 79
GPI Outputs, Programming
Six GPI outputs are available for use as tally or status indicators, driving an LED or logic
input. Outputs are open collector, active low.
Two drop down menus provide independent monitoring for each output. Available status
parameters include Idle, Playing, and Recording. Each of these states may be monitored for
Channel 1, Channel 2, Channel 3, Channels 1+2, Channels 2+3, or Channels 1+2+3.
Figure 24: Output Configuration Window
The GPI connector pinout will be found in Appendix A.
Control
Descriptions of Control features may be found in the Automation Control section starting on
page 69.
Time Code
The Image Server supports only drop frame time code for NTSC operations.