Polycom 6000 - Manual (Page 35)

Monitors and Cameras
3 - 7
• Consider decreasing the monitor’s sharpness, brightness, and contrast
settings if they are set to their maximum values.
Connecting Cameras
Polycom QDX 6000 systems provide inputs for PTZ cameras. You can use the
RS-232 serial port on the system to control supported non-Polycom cameras or
cameras not connected to a main camera input.
Refer to your system’s setup sheet for connection details. If you connect a
supported PTZ camera, the system detects the camera type and sets the
appropriate configuration. Make sure that the system is powered off before
you connect devices to it.
Connecting Cameras to Polycom QDX 6000 Systems
The following table shows how you can connect video sources to a Polycom
QDX 6000 system.
Video Input
Number
Connector Acceptable Input Power Control
1 (main
camera) S-Video S-Video Provided Camera PTZ,
IR Input
2 (auxiliary
camera) RCA Composite None None
3 (document
camera) S-Video S-Video None None
4 (VCR) RCA Composite None None
5 (VGA) VGA VGA None None