Paradyne 3800PLUS - Manual (Page 212)

COMSPHERE 3800Plus Modems
Index-2 October 1998 3980-A2-GB30-40
B
Backspace Character, 8-16
Bad Lines Auto Originate, 8-30
Bell Mode, 13-3
Blind Dial Pause, 8-19
Break Buffer Control, 8-38
Break Forces Escape, 8-15
Buffer Size in Buffer Mode, 8-40
Busy Tone Detect, 8-20
C
cables
auxiliary, E-4
crossover, E-4
Call Answer commands (V.25bis), F-2
Call Request commands (V.25bis), F-1
Call Setup branch, 5-1
Carriage Return Character, 8-15
Carrier On Level, 8-31
cellular, 13-9, 13-10
Cellular (Mobile), 8-45, 13-9
Cellular (PSTN), 13-9
Cellular Enhancement, 8-40
Cellular RJ11 Adapt, 8-45
Change Directory, 5-4
character format, 13-1, C-4
Choose Function, 8-4
Clone to Remote, 9-4
Command Character Echo, 8-15
command entry guidelines, 13-1
Command mode, 13-1
command responses (V.25bis), F-3
compression
MNP5, 13-15
V.42bis, 13-17
COMSPHERE 6700 Series NMS, 1-1
connection, 2-5
configuration options, 8-7–8-47
Dial Line, 8-24
DTE Interface, 8-7
editing and saving, 8-5
error control, 8-33
factory default, G-1
for cellular, 13-9, 13-10
Leased Line, 8-28
Line Dialer, 8-19
Miscellaneous, 8-43
saving, 13-12
Security, 8-46
selecting, 4-11
Tests, 8-41
V.42/MNP/Buffer, 8-33
viewing, 13-12
Configure branch, 8-4
connect messages, B-1
connection
ac power, 2-4
COMSPHERE 6700 Series NMS, 2-5
dial-line, 2-4
DTE, 2-3
leased-line, 2-4
Control branch, 9-1
CT111 Rate Control, 8-13, 13-27
CTS Control (\D), 8-11, 13-13
Customer configuration areas, 8-1
D
D-Lead signaling, 8-23
Data Bits, 8-8
Data mode, 13-1
data rates suppported, D-2
DCP (Diagnostic Control Panel), 2-1
description, 4-1
Hidden Choice Indicators, 4-4
keypad, 4-5
operation, 4-4
security access, 4-13
shared, 4-2
types, 4-1
using to change factory presets, 4-11
default configuration options, 4-11, G-1
setting with AT commands, 4-11
setting with DCP, 4-11
Dial, 5-2
dial backup, C-4
Dial Command modifiers, 13-4
“!” (hook flash), 5-6
“,” (pause), 5-6
“;” (return to Command mode), 5-6
P (Pulse dial), 5-6, 8-19, 13-4
R (Reverse), 5-6
T (Tone dial), 5-6, 8-19, 13-4
W (Wait), 5-6
dial line connection, 2-4
Dial Line Rate, 8-24, 13-24
Dial Standby/Return to Dial, 5-3
Dial Tone Detect, 8-19
Dial Transmit Level (&I), 13-10
Dial Transmit Level Type (&J), 13-10
Dialer Type, 8-19
dimensions, D-3
Directory Location 1 Callback, 8-44
disabled commands, 8-43
Disconnect, 5-2
Disconnect at 300 bps, 13-17
display configuration options (&V), 13-12
Download Code, 9-4
download failure, 9-6
download latest firmware, 9-6
DSR Control (&S), 8-10, 13-11
DTE connection, 2-3
DTE Dialer Type, 8-14
DTE Interface, 8-7, D-3
DTE LL (CT141), 13-26
DTE Local Loopback, 8-41