Paradyne 3800PLUS - Manual (Page 166)

COMSPHERE 3800Plus Modems
13-32 October 1998 3980-A2-GB30-40
Table 13-2
(15 of 15)
3800 Plus S-Registers
AT Command Front Panel Branch Description
S92 V.29 Train On Data
Register determines whether the modem must receive a standard V.29
training sequence in order to enter data mode (Disable) or whether it
should use the received data mode for training (Enable). Effective only if
the V.29 feature is installed and V.29 is selected for the leased-line rate.
Register has the following values:
0=Disable
1=Enable
Factory setting is Disable.
Configure\Edit
Leased Line
S93 RJ11 Cellular Adapt
Valid only if ETC is installed, register controls support for an RJ11
connection, including generation of the ETC 1.1 Calling Tone during call
origination.
Register has the following values:
0=Disable
1=Enable
Factory setting is Disable.
Configure\Edit\Misc