Paradyne 3800PLUS - Manual (Page 140)

COMSPHERE 3800Plus Modems
13-6 October 1998 3980-A2-GB30-40
Table 13-1
(4 of 15)
3800 Plus AT Commands
AT Command Front Panel Branch Description
P Pulse Dial
Sets the modem for pulse dial mode. See the D
n command.
Configure\Edit\
Line Dialer
Q n Result Codes
Q0
Enables modem to send result codes to the DTE.
Q1 Disables modem from sending result codes to the DTE.
Q2 Enables in Originate mode only for modem to send result codes to
the DTE. Required for most UNIX applications.
Configure\Edit\
DTE Dialer
S r=n Change S-Register
Changes contents of S-register (where
r is the S-Register, and n is the
new value). See Table 13-2 , 3800 Plus S-Registers.
None
S r? Display S-Register
Displays value of S-register where
r is the S-register number.
None
T Tone Dial
Sets the modem for tone dial mode. Configure\Edit\
Line Dialer
V n Result Codes Format
V0
Displays result codes in Number (1) format digits.
V1 Displays result codes as text.
V2 Displays result codes in Number (2) format (digits).
Configure\Edit\
DTE Dialer