Perle Systems Perle IOLAN DS1 - Manual (Page 88)

Serial Port Profiles
88 IOLAN DS1/TS2 User’s Guide, Version 3.4
UDP Sockets Profile
Overview
When you configure UDP , you are setting up a range of IP addresses and the port numbers that you
will use to send UDP data to or receive UDP data from.
Functionality
The UDP profile configures a serial port to broadcast UDP data to systems and/or receive UDP data
from systems.
Dial Out If you want the modem to dial a number when the serial port is started, enable
this parameter.
Default: Disabled
Dial Timeout The number of seconds the IOLAN will wait to establish a connection to a
remote modem.
Range: 1-99
Default: 45 seconds
Dial Retry The number of times the IOLAN will attempt to re-establish a connection with
a remote modem.
Range: 0-99
Default: 2
Modem The name of the predefined modem that is used on this line.
Phone The phone number to use when Dial Out is enabled.