Perle Systems Perle IOLAN DS1 - Manual (Page 168)

Management
168 IOLAN DS1/TS2 User’s Guide, Version 3.4
Field Description
Configure the following parameter:
Advanced
Overview
Review the configuration options in the Advanced page to determine if any of them apply to your
implementation.
Login Tab Field Descriptions
Configure the following parameters:
Command Line The name of the application that has been already been downloaded to the
IOLAN, plus any parameters you want to pass to the program. For example,
using sample
outraw program (this is sample program supplied with the
SDK), you would type:
outraw -s 0 192.168.2.1:10001 Acct:10001
if you were starting the application on the Server (notice the -s 0 parameter
specifies serial port 1 to this particular application).
Field Format: Maximum of 80 characters
Use System Name
in Prompts Displays the System Name field value instead of default product name. When
enabled, the Server Name is displayed in the IOLAN login prompt, CLI
prompt, WebManager login screen, and the heading of the Menu.
Default: Disabled
Display Login
Banner This parameter concerns the banner information (product name/software
version). This banner information is presented to a user with a login prompt.
For security reasons, you can turn off the display of this information.
Default: Disabled
Use Custom Login
Prompt When set, and a custom language file is in use, the login prompt will use the
string defined in the language file as the login prompt instead of the default
prompt,
login: .
Default: Disabled