Perle Systems Perle IOLAN DS1 - Manual (Page 96)

Serial Port Profiles
96 IOLAN DS1/TS2 User’s Guide, Version 3.4
Enable Line Mode When enabled, keyboard input is not sent to the remote host until Enter is
pressed, otherwise input is sent every time a key is pressed.
Default: Disabled
Map CR to CRLF When enabled, maps carriage returns (CR) to carriage return line feed (CRLF).
Default: Disabled
Interrupt Defines the interrupt character. Typing the interrupt character interrupts the
current process. This value is in hexadecimal.
Default: 3 (ASCII value ^C )
Quit Defines the quit character. Typing the quit character closes and exits the current
telnet session. This value is in hexadecimal.
Default: 1c (ASCII value FS )
EOF Defines the end-of-file character. When Enable Line Mode is enabled, entering
the EOF character as the first character on a line sends the character to the
remote host. This value is in hexadecimal.
Default: 4 (ASCII value ^D )
Erase Defines the erase character. When Line Mode is Off , typing the erase character
erases one character. This value is in hexadecimal.
Default: 8 (ASCII value ^H )
Echo Defines the echo character. When Line Mode is On , typing the echo character
echoes the text locally and sends only completed lines to the host. This value is
in hexadecimal.
Default: 5 (ASCII value ^E )
Escape Defines the escape character. Returns you to the command line mode. This
value is in hexadecimal.
Default: 1d (ASCII value GS )