Perle Systems Perle IOLAN DS1 - Manual (Page 56)

Using DeviceManager to Connect to the IOLAN
56 IOLAN DS1/TS2 User’s Guide, Version 3.4
Using DeviceManager to Connect to the IOLAN
DeviceManager can connect to existing IOLANs or assign an IP address to a new IOLAN. Whenever
you connect to the IOLAN through the DeviceManager, you connect as the Admin user and must
supply the password for the Admin user.
Starting a New Session
To start a new session and connect to the IOLAN using the DeviceManager:
1. Start the DeviceManager by selecting Start , All Programs , Perle , DeviceManager ,
DeviceManager .
2. When the DeviceManager starts, it searches the network for IOLANs.
If your IOLAN is not in the local network and you do not have a multicast enabled router in your
network and therefore is not displayed in the selectable list, but can be pinged from your PC, you
can add it to the selectable list by clicking the
Add button.
Type in the IOLAN’s IP address and click Add Server . Select the manually added server to
connect to it.