beautypg.com

Adding/editing additional hosts – Perle Systems Perle IOLAN DS1 User Manual

Page 85

background image

85

Serial Port Profiles

Adding/Editing Additional Hosts

You can define a list of hosts that the serial device will communicate to or a primary/backup host.

Configure the following parameters:

Initiate Connection
When any data is
received

Initiates a connection to the specified host when any data is received on the
serial port.

Default: Disabled

Initiate Connection
When <hex value
>
is received

Initiates a connection to the specified host only when the specified character is
received on the serial port.

Default: Disabled

Permit
Connections in
Both Directions

When this option is enabled, the connection can be initiated by either the
IOLAN or a host.

Default: Disabled

Define additional
hosts to connect to

When this option is enabled, you can define up to 49 hosts that the serial device
connected to this serial port will attempt communicate to. With this mode of
operation, the IOLAN will connect to multiple hosts simultaneously.

Default: Enabled

Add Button

Click the

Add

button to add a host to the list of hosts that will be receiving

communication from the serial device connected to the IOLAN.

Edit Button

Highlight an existing host and click the

Edit

button to edit a host in the list of

hosts that will be receiving communication from the serial device connected to
the IOLAN.

Delete Button

Click the

Delete

button to delete a host to the list of hosts that will be receiving

communication from the serial device connected to the IOLAN.

This manual is related to the following products: