Perle Systems Perle IOLAN DS1 - Manual (Page 77)

77
Serial Port Profiles
Break Handling Specifies how a break is interpreted.
Data Range:
z None—The IOLAN ignores the break key completely and it is not passed
through to the host.
z Local—The IOLAN deals with the break locally. If the user is in a
session, the break key has the same effect as a hot key.
z Remote—When the break key is pressed, the IOLAN translates this into a
telnet break signal which it sends to the host machine.
z Break Interrupt—On some systems such as SunOS, XENIX, and AIX, a
break received from the peripheral is not passed to the client properly. If
the client wishes to make the break act like an interrupt key (for example,
when the stty options
-ignbrk and brkintr are set).
Default: None
Dial In If the console port is remote and will be dialing in via modem or ISDN TA,
enable this parameter.
Default: Disabled
Dial Out If you want the modem to dial a number when the serial port is started, enable
this parameter.
Default: Disabled
Dial Timeout The number of seconds the IOLAN will wait to establish a connection to a
remote modem.
Range: 1-99
Default: 45 seconds
Dial Retry The number of times the IOLAN will attempt to re-establish a connection with
a remote modem.
Range: 0-99
Default: 2
Modem The name of the predefined modem that is used on this line.
Phone The phone number to use when Dial Out is enabled.