Perle Systems Perle IOLAN DS1 - Manual (Page 124)

Adding/Editing Users
124 IOLAN DS1/TS2 User’s Guide, Version 3.4
Field Descriptions
Configure the following parameters:
Session 1, 2, 3, 4 You can configure up to four (4) sessions that the user can select from to
connect to a specific host after that user has successfully logged into the
IOLAN (used only on serial ports configured for the
Terminal profile).
Data Options:
z None—No connection is configured for this session.
z Telnet—For information on the Telnet connection window, see Telnet
Settings on page 95 .
Default: None
Settings Button Click this button to configure the connection parameters for this session.
Connect
Automatically Specify whether or not the session(s) will start automatically when the user
logs into the IOLAN.
Default: Disabled
Host The host that the user will connect to in this predefined session.
Default: None
TCP Port The TCP port that the IOLAN will use to connect to the host in this predefined
session.
Default: 23