Perle Systems Perle IOLAN DS1 - Manual (Page 75)

75
Serial Port Profiles
General Tab Field Descriptions
The Console Management General tab configures how the serial port will be accessed by the user
through the network.
Configure the following parameters:
Protocol Specify the connection method that users will use to communicate with a serial
device connected to the IOLAN through the network.
Default: Telnet
Listen for
Connections on
TCP Port The port number that the IOLAN will listen on for incoming TCP connections.
Default: 10001, depending on the serial port number
Enable IP Aliasing Enables/disables the ability to access a serial device connected to the serial port
by an IP address (or host name that can be resolved to the Internet Address in a
DNS network) instead of the IOLAN’s IP address and port number.
Default: Disabled
IP Address Users can access serial devices connected to the IOLAN through the network
by the specified Internet Address (or host name that can be resolved to the
Internet Address in a DNS network).
Data Options: IPv4 Address