Hardware and connectivity, Introduction, Iolan components – Perle Systems Perle IOLAN DS1 User Manual
Page 23: What’s included, What you need to supply, Available accessories, Chapter 2 hardware and connectivity
IOLAN DS1/TS2 User’s Guide, Version 3.4
23
Hardware and
Connectivity
Chapter 2
2
Introduction
This chapter describes how to physically set up your IOLAN unit. It includes an overview of the
IOLAN hardware components and how to power up the IOLAN to make sure it works correctly.
IOLAN Components
What’s Included
The following components are included with your product:
z
IOLAN unit
z
External power supply
z
Quick Start Guide (for I/O models, a soft copy exists on the CDROM)
z
Warranty Card
z
A CD-ROM containing documentation, firmware, configuration software, TruePort, etc.
z
IOLAN models that have an RJ45 serial connector(s) come with an RJ45
J
DB9F adapter
What You Need to Supply
Before you can begin, you need to have the following:
z
A serial cable(s) to connect serial devices to your IOLAN unit
z
An Ethernet CAT5 10/100/1000BASE-T cable to connect the IOLAN unit to the network
Available Accessories
The following accessories are available for purchase for the various IOLAN models:
z
DIN Rail Mounting Kit (35mm) for the desktop models
z
3 meter RJ45M-RJ45M 8-wire Sun/Cisco modular cable
z
RJ45 to DB25 DTE Male adapter
z
RJ45 to DB25 DCE Male adapter
z
RJ45 to DB25 DTE Female adapter
z
RJ45 to DB9 Male DTE adapter
z
RJ45 to DB9 Female DTE adapter
Contact your distributor for details.