Temperature functionality, I/o udp settings, Overview field descriptions – Perle Systems Perle IOLAN DS1 User Manual
Page 134
Settings
134
IOLAN DS1/TS2 User’s Guide, Version 3.4
I/O UDP Settings
Configure the following parameters:
Temperature Functionality
Overview
The
Temperature
tab configures the temperature scale settings for T4 models.
Field Descriptions
Configure the following parameter:
UDP Entry
When enabled, broadcasts I/O status (data) to the specified range of IP
addresses.
Default: Disabled
Start IP Address
The first host IP address in the range of IP addresses (for IPV4 or IPV6) that
the IOLAN will listen for messages from and/or send messages to.
End IP Address
The last host IP address in the range of IP addresses (for IPV4, not required for
IPV6) that the IOLAN will listen for messages from and/or send messages to.
Port
The UDP port that the IOLAN will use to relay messages to servers/hosts.
Default: 0 (zero)
Temperature Scale Select the temperature scale that will be used to display temperature data.
Data Options: Fahrenheit or Celsius
Default: Celsius